Focus on the R&D and manufacturing of temperature sensors in emerging industries such as aviation and new energy vehicles
National hotline
136-5182-6898
CN
National hotline:
136-5182-6898
WeiLianFengRan Sensor Technology Co., LTD
Home > Products > Temperature sensor accessories >
TGG Isolated Rail Mounted Temperature Transmitter
Overview:
It receives the RTD signal input and outputs a standard DC signal to the control system or other instruments after isolation and conversion. Intelligent RTD temperature transmitter with USB programming interface, you can connect this temperature transmitter and PC with an adaptor cable, and set the input RTD type and measurement range by software programming on PC. Single channel, one input, one output. The temperature transmitter is powered by an independent DC power supply, and the input-output-power channels are isolated from each other. It can be used with unit combination instruments and DCS, PLC and other systems, and is widely used in various temperature detection and control systems for industrial processes.
Get the program
Download
Power supply
Supply voltage range 20～30VDC
Rated supply voltage 24VDC
Current consumption (at 24VDC power supply) <40mA
Inputs(can be programmed via PC and software)
Thermal resistance Pt100, Pt200, Pt500, Pt1000, Cu50, etc.
Temperature range Depending on the type of sensor connected
RTD sensor connection form Support 2, 3, 4-wire system connection
Allowable wire resistance Under 15Ω per wire
Output
Output Current 4 to 20mA; Other specified currents
Output Voltage 1 to 5V; other specified voltages
Load resistance 4~20mA output, ≤350Ω (factory default, load can be specified)
Comprehensive parameters
Temperature drift 0.01%F.S./℃
Response time < 0.4s
Isolation capability Between input - output - power supply 2.5KV, 1min, 50Hz
Insulation resistance Between input - output - power supply ≥100MΩ / 500VDC
Working environment temperature -20℃～＋60℃
Storage environment temperature -40℃～＋80℃
Housing material / Protection class Flame retardant ABS/IP20
Dimension 16×116×110（mm）

Technical parameters Product diagram
Technical parameters
Power supply
Supply voltage range 20～30VDC
Rated supply voltage 24VDC
Current consumption (at 24VDC power supply) <40mA
Inputs(can be programmed via PC and software)
Thermal resistance Pt100, Pt200, Pt500, Pt1000, Cu50, etc.
Temperature range Depending on the type of sensor connected
RTD sensor connection form Support 2, 3, 4-wire system connection
Allowable wire resistance Under 15Ω per wire
Output
Output Current 4 to 20mA; Other specified currents
Output Voltage 1 to 5V; other specified voltages
Load resistance 4~20mA output, ≤350Ω (factory default, load can be specified)
Comprehensive parameters
Temperature drift 0.01%F.S./℃
Response time < 0.4s
Isolation capability Between input - output - power supply 2.5KV, 1min, 50Hz
Insulation resistance Between input - output - power supply ≥100MΩ / 500VDC
Working environment temperature -20℃～＋60℃
Storage environment temperature -40℃～＋80℃
Housing material / Protection class Flame retardant ABS/IP20
Dimension 16×116×110（mm）
Product diagram

Copyright © WeiLianFengRan Sensor Technology Co., LTD copyright Record No.:ZheICPB No. 2022024857-1